Difference between revisions of "Butter"

From Cargo Handbook - the world's largest cargo transport guidelines website
Line 6: Line 6:
 
| humidity and moisture              = <ul><li>Designation: Humidity/water content</li><li>Relative humidity: 75 - 80%</li><li>Water content: 19 - 24%</li><li>Maximum equilibrium moisture content: 75%</li></ul>
 
| humidity and moisture              = <ul><li>Designation: Humidity/water content</li><li>Relative humidity: 75 - 80%</li><li>Water content: 19 - 24%</li><li>Maximum equilibrium moisture content: 75%</li></ul>
 
| oil content                        = Chemically speaking, butter consists of the following constituents:<br><ul><li>fats approx. 82%</li>water approx. 16%<li>nonfat milk components approx. 2%</li></ul>The main constituents of butter are glycerol and fatty acids
 
| oil content                        = Chemically speaking, butter consists of the following constituents:<br><ul><li>fats approx. 82%</li>water approx. 16%<li>nonfat milk components approx. 2%</li></ul>The main constituents of butter are glycerol and fatty acids
| ventilation                        = 15 - 20 circulations/hour without supply of fresh air in order to ensure uniform cooling of the cargo in the hold.
+
| ventilation                        = 15 - 20 circulations/hour without supply of fresh air in order to ensure uniform cooling of the cargo in the hold.br>Fresh air should not be supplied in order to avoid any possible increase in temperature and the introduction of microorganisms into the holds.<br>
Fresh air should not be supplied in order to avoid any possible increase in temperature and the introduction of microorganisms into the holds.
 
 
| risk factors                        = Butter is sensitive to pressure and impact loads. Improper cooling, handling or stowage may result in damage. Unlike chilled butter, frozen butter is relatively insensitive to such loads.
 
| risk factors                        = Butter is sensitive to pressure and impact loads. Improper cooling, handling or stowage may result in damage. Unlike chilled butter, frozen butter is relatively insensitive to such loads.
 
}}
 
}}

Revision as of 14:29, 19 January 2012

Infobox on Butter
Example of Butter
Butter.jpg
Facts
Origin This Table shows only a selection of the most important countries of origin and should not be thought of as exhaustive.
  • Europe: Finland, Sweden, Denmark, Germany, Netherlands, Belgium, France, Ireland, England, Romania, Czech Republic
  • Africa
  • Asia
  • America: Canada, USA, Argentina
  • Australia: Australia, New Zealand
Stowage factor (in m3/t)
  • 1.50 m³/t (cartons)
  • 1.34 - 1.39 m³/t (cartons)
Angle of repose -
Humidity / moisture
  • Designation: Humidity/water content
  • Relative humidity: 75 - 80%
  • Water content: 19 - 24%
  • Maximum equilibrium moisture content: 75%
Oil content Chemically speaking, butter consists of the following constituents:
  • fats approx. 82%
  • water approx. 16%
  • nonfat milk components approx. 2%
The main constituents of butter are glycerol and fatty acids
Ventilation 15 - 20 circulations/hour without supply of fresh air in order to ensure uniform cooling of the cargo in the hold.br>Fresh air should not be supplied in order to avoid any possible increase in temperature and the introduction of microorganisms into the holds.
Risk factors Butter is sensitive to pressure and impact loads. Improper cooling, handling or stowage may result in damage. Unlike chilled butter, frozen butter is relatively insensitive to such loads.

Butter

Description

There are two varieties of butter generally:
a) Sweet cream butter
b) Sour cream (lactic) butter
which can only be easily distinguished organoleptically from one another.

The salt content may vary from 0,5 to 1,5% or even higher in those countries where salt is popular. However, butter is also shipped in unsalted form. Butter is normally packed in bulk, in 25 kg blocks, wrapped in polythene or vegetable parchment, and placed in corrugated fibreboard cases, sealed with adhesive tape, also packed in foil or parchment wrapped packets in corrugated fibreboard cases. Small quantities of butter are also packed in cans of various sizes. The choice of inner bulk wrap, plastic or parchment, is important as the use of a poor quality wrap will increase the rate of development of surface deterioration. Packaging should be in close contact with the butter so as to exclude air from the surface which will lead to oxidation problems. Apart from the surface effect, the outer carton has little influence on the keeping quality except to prevent access of absorbed taints. Butter should not be stored with products having a strong odour, such as fuel oil, fruit etc.
Although butter microbiologically is fairly stable, chemically it is less stable and for this reason it must be held approximately -12°C during storage and shipment. Provided there is no fault in the butter at the time of production, damage to butter in transit is most often caused by temperature fluctuation. There is a progressive increase in the rate of deterioration with rise in temperature, leading to condensation of moisture on the wrapper and mould development. The presence of mould will be evident by the development of surface growths, bright red stains, blackish spots spreading to brown stains, green surface growths, etc. If there is gross mould growth in the butter and atmosphere will be characterized with a musty odour. Poor storage conditions and inferior packaging can also contribute to mould growth. The presence of salt or lactic acid inhibits the growth of yeasts, mould and bacteria. The growth of micro-organisms and the action of atmospheric oxygen give rise to off-flavours which can render the butter inedible. Ultra violet light has a pre-oxidative effect and also increases the rate of development of tallowy off-flavours and as such bulk butter without wrapping should not be exposed to daylight for long periods.
Butter packed in cans is quite stable at temperatures up to about 20°C. Above this temperature melting might occur, which destroys the texture and may affect the flavour.
Pallet loads of butter which have been shrink wrapped suffer less damage as condensation forms on the wrap and the cases are protected. If cartooned butter is subjected, while in transit, to fire, smoke, etc., it is likely that a taint will occur and the most probable entry is through the seam of the outer carton.
See also Fats.