Difference between revisions of "Balsa Wood"

From Cargo Handbook - the world's largest cargo transport guidelines website
(Description)
(Description)
Line 8: Line 8:
 
}}
 
}}
 
==Description==
 
==Description==
A wood lighter than cork from Central and South America.
+
A wood lighter than cork from Central and South America. Balsa wood is one of the lightest varieties of wood available but it is remarkably strong for its weight. The wood is popular for its use as a light weight contruction material. Particularly hobbyists use the product to make models.
 
<br><br>
 
<br><br>
Easily damaged by crushing or wetting. Should not be overstowed with heavy goods and kept away from those which are moist or oily.<br><br>
+
Raw balsa wood has a high moisture content, so it must be dried in a kiln for at least two weeks before it can be used commercially. Afterwards it is usually cut into sheets or round dowels. <br><br>
 +
Balsa wood is easily damaged by crushing or wetting. It should not be overstowed with heavy goods and kept away from those which are moist or oily.<br><br>
 
<b>Full information on this product is in the process of completion.</b>
 
<b>Full information on this product is in the process of completion.</b>
 
[[Category:Forest products]]
 
[[Category:Forest products]]
 
[[Category:Products]]
 
[[Category:Products]]

Revision as of 14:21, 3 April 2012

Infobox on Balsa Wood
Example of Balsa Wood
Picturefollow.jpg
Facts
Origin This table shows only a selection of the most important countries of origin and should not be thought of as exhaustive.
Stowage factor (in m3/t) - m³/t
Humidity / moisture
  • Relative humidity: %
  • Water content: %
  • Maximum equilibrium moisture content: %
Ventilation -
Risk factors -

Balsa Wood

Description

A wood lighter than cork from Central and South America. Balsa wood is one of the lightest varieties of wood available but it is remarkably strong for its weight. The wood is popular for its use as a light weight contruction material. Particularly hobbyists use the product to make models.

Raw balsa wood has a high moisture content, so it must be dried in a kiln for at least two weeks before it can be used commercially. Afterwards it is usually cut into sheets or round dowels.

Balsa wood is easily damaged by crushing or wetting. It should not be overstowed with heavy goods and kept away from those which are moist or oily.

Full information on this product is in the process of completion.